YANING Launches Anti Corrosion Seamless Interlocking Operating Room Wall Panel System

YANING has launched model YN-WP-AC50, an operating room wall panel built around a 1.2 mm electrolytic steel skin with silver ion antibacterial coating, assembled on a seamless interlocking aluminium joint system. The panel was developed after field reports that wall finishes in theatres were failing at joints and along high-touch surfaces, in rooms where walls are disinfected several times per shift.

Engineered for Daily Disinfection

Operating theatre walls are exposed to alcohol, chlorine, hydrogen peroxide and quaternary ammonium compounds on a daily basis. Standard coated panels can chalk, blister or discolour within two to three years under that regime, and joint sealant can become a harbour for microbial growth. The YN-WP-AC50 addresses both the surface and the joint, with a salt spray rating of 500 hours and a chemical resistance profile tested against the four disinfectant families used in most hospitals.

• 500 hours neutral salt spray corrosion resistance for long service under daily disinfection
• Silver ion antibacterial coating with an above 99 percent reduction rate against E. coli and S. aureus
• Seamless interlocking aluminium joint system that removes dirt traps at panel interfaces
• Class A fire rated 50 mm polyurethane core at 40 kg per cubic metre density

Finishes That Match Hospital Interiors

Panels are available in matte, gloss and wood grain finishes with RAL colour matching, so the theatre department can be coordinated with corridors, recovery bays and staff areas without switching panel systems. Standard panels measure up to 1200 by 3000 mm and are supplied knock-down on steel pallets with edge protection and a moisture barrier wrap for sea freight.

• Custom RAL colours and wood grain finishes for interior design coordination
• Optional 75 mm and 100 mm thicknesses for acoustic or fire separation requirements
• Panels supplied knock-down for container efficiency and reduced freight cost
• Compatible with YANING hermetic doors, ceiling plenums and control consoles

Key Specifications

Availability and Delivery

Model YN-WP-AC50 is available from USD 28 to 55 per square metre with a minimum order quantity of 50 square metres. Supply capability is 20,000 square metres per month, and lead time runs 10 to 18 working days after colour and layout confirmation.

About YANING

YANING is a manufacturer of modular operating room and hospital cleanroom systems based in Guangdong, China. The company supplies prefabricated wall and ceiling systems, hermetic doors, laminar flow ceilings, control panels and medical gas accessories, and delivers projects on a single-source basis covering design, production, installation and commissioning. YANING systems are CE marked and manufactured under ISO 9001:2015 and ISO 13485 quality management.

Media and sales enquiries: Request a panel sample and a project material take-off based on your drawings.